Skip to content

AH-NFM-TECH-06 · Assemblies

Assemblies & Failure

A metal surface is rarely where the most serious failure begins. Visible surface change may be only part of the problem.

Under technical reviewAH-NFM-TECH-06v1.0Registry revision: May 2026 · review not verified

Independent technical review is pending. Publication does not establish scientific approval.

Under editorial review — PDF not available for public download.

Why the whole assembly matters

Bronze statues may be split by corroding internal ferrous supports. Lead figures may fail when water reaches a retained core and iron armature. Zinc statuary may collapse as an internal armature rusts. Electrotype shells can rely on hidden supports. Aluminium may fail at welded joints or fixings. Architectural metalwork may deteriorate at interfaces with stone, timber, glass, masonry or dissimilar metals.

Assembly elements to consider

  • Armature or internal support: iron support in lead, zinc, bronze or electrotype statuary.
  • Fixings and anchors: bolts, cramps, dowels, screws, brackets, sockets.
  • Joints and seams: soldered, brazed, welded, pinned, riveted or assembled sections.
  • Plinth and stone interface: statue bases, plaques, brackets, memorial mounts.
  • Mixed-metal contact: bronze with steel fixing; copper with incompatible metal; plated surface.
  • Moving or working elements: gates, fountains, kinetic sculpture, access fittings.
  • Water-management detail: roof outlets, fountain recirculation, drainage, sheltered recesses.

Galvanic risk in plain language

Where two different metals are electrically connected in the presence of moisture, one can corrode preferentially. Non-specialists do not need to calculate a design from this guide; they need to recognise when mixed metals and persistent moisture are present and ask for competent specification advice. Record visible bolts of a different colour or material, rust staining at interfaces, green or white corrosion concentrated around a fixing, patch repair in a different metal, and water traps, blocked drainage or sheltered slow-drying recesses.

Water: the recurring driver

Water may be rain, condensation, fountain water, cleaning water, salts in splash zones, roof leakage or trapped moisture at a fixing. A condition record that photographs only the surface and ignores water routes is incomplete.

  • Is the asset exposed, sheltered, near road salts, coastal air or a water feature?
  • Does rain wash the surface or does water sit in recesses?
  • Are stains visible below fixings, joints or run-off lines?
  • Can water enter a hollow object through cracks, holes or failed seams?
  • Are outlets and drainage paths clear and performing?

Questions for proposal review

  1. Does the proposal assess the object as an assembly, not only as a surface?
  2. Are armatures, fixings, joins, supports, water paths and adjacent materials identified?
  3. Where internal condition cannot be seen, is uncertainty acknowledged and proportionate investigation proposed?
  4. Is any replacement fixing or material justified for compatibility, significance, durability and inspectability?
  5. Are public-safety and temporary-support risks addressed?
  6. How will interventions be documented for future custodians?
  7. What maintenance inspections will monitor the interfaces most likely to fail?

What not to do

  • Do not approve surface cleaning as the sole response to structural staining or movement.
  • Do not replace iron, steel, bronze or brass fixings ad hoc without material-compatibility advice.
  • Do not seal or coat a metal asset while water entry and hidden corrosion remain unresolved.
  • Do not move or dismantle hollow statuary simply to inspect it.
  • Do not omit adjacent stone, masonry, timber, glazing or water-system condition from the record.

Need project-specific advice?

Arts Heritage is a conservation practice. For advice on a particular asset or proposal, contact Arts Heritage ↗.