Skip to content

Condition / problem

White corrosion products

White, powdery deposits on lead, zinc, aluminium and some other metals.

Introductory orientation · not independently reviewed

Synopsis

White deposits typically arise on lead, zinc and aluminium when their normal protective films are disturbed — by organic acids, persistent damp, alkaline contact or chloride exposure.

Evidence and limitations

This introduction is published for orientation, not as independently reviewed technical advice. Record visible observations separately from possible explanations. Appearance alone does not establish alloy, maker, date, corrosion mechanism or an appropriate treatment.

Verified author, technical reviewer and substantive revision date: not yet recorded. Claim-specific source mapping is pending editorial review.

General reference bibliography →

What you may be seeing

White, grey-white or pale deposits on metal surfaces, often in sheltered or damp areas, sometimes powdery and easily disturbed.

Materials affected

  • Lead
  • Zinc
  • Aluminium

Possible causes

  • Contact with organic acids (oak, lichens, some sealants) — typical on lead.
  • Damp, sheltered conditions preventing stable patina formation.
  • Alkaline contact (new concrete, certain mortars).
  • Chloride exposure (especially on aluminium).

Why it matters

These deposits indicate that the metal's normal protective layer is not functioning. Continued loss of material can follow if the cause is not addressed.

What to photograph and record

  • Extent and location with scale.
  • Adjacent materials potentially contributing to the cause.
  • Setting (sheltered/damp pockets, drainage geometry).

What not to do

  • Do not attempt treatment without appropriate conservation advice.
  • Do not test cleaning agents, abrasives, polishes or coatings on the surface.
  • Do not remove staining, growth, deposits or loose material to 'see what is underneath'.
  • Do not apply consumer products marketed for domestic metal care to historic surfaces.

When to seek specialist advice

  • Where the material, condition, structural integrity or historic significance is uncertain.
  • Where proposals for cleaning, coating, repair, removal or replacement are under consideration.
  • Where active deterioration appears to be progressing between observations.
  • Before any contractor or volunteer undertakes physical work on the metal surface.

Prepare a visual condition record →

Browse published project-specific evidence →

Explore related guidance

Need project-specific advice?

Arts Heritage is a conservation practice. For advice on a particular object or proposal, contact Arts Heritage ↗.