Skip to content

Condition / problem

Galvanic corrosion

Preferential corrosion of the less-noble metal where two different metals meet in the presence of moisture.

Introductory orientation · not independently reviewed

Synopsis

Galvanic corrosion is a specific, predictable problem at metal-to-metal interfaces. It can develop slowly and silently inside assemblies and is often diagnosed only when visible symptoms appear downstream of the interface itself.

Evidence and limitations

This introduction is published for orientation, not as independently reviewed technical advice. Record visible observations separately from possible explanations. Appearance alone does not establish alloy, maker, date, corrosion mechanism or an appropriate treatment.

Verified author, technical reviewer and substantive revision date: not yet recorded. Claim-specific source mapping is pending editorial review.

General reference bibliography →

What you may be seeing

Localised corrosion concentrated where dissimilar metals meet — for example rust weeping from a ferrous armature inside a bronze figure, white powder around an aluminium-to-copper junction, or accelerated loss at a steel fixing in a copper roof.

Materials affected

  • Bronze
  • Copper
  • Iron
  • Steel
  • Aluminium
  • Zinc
  • Mixed-metal assemblies

Possible causes

  • Direct contact between dissimilar metals.
  • Presence of moisture (including condensation or trapped damp).
  • Original design without isolating membranes or insulators.
  • Loss of historic insulating layers through age or repair.

Why it matters

The interface may be hidden. Visible symptoms — staining, lifting, weeping — frequently appear where the underlying interface is least accessible. The correct response is rarely cosmetic.

What to photograph and record

  • Symptom in context.
  • All identifiable metals at the interface.
  • Setting and any access for further investigation.

What not to do

  • Do not attempt treatment without appropriate conservation advice.
  • Do not test cleaning agents, abrasives, polishes or coatings on the surface.
  • Do not remove staining, growth, deposits or loose material to 'see what is underneath'.
  • Do not apply consumer products marketed for domestic metal care to historic surfaces.

When to seek specialist advice

  • Where the material, condition, structural integrity or historic significance is uncertain.
  • Where proposals for cleaning, coating, repair, removal or replacement are under consideration.
  • Where active deterioration appears to be progressing between observations.
  • Before any contractor or volunteer undertakes physical work on the metal surface.

Prepare a visual condition record →

Browse published project-specific evidence →

Explore related guidance

Need project-specific advice?

Arts Heritage is a conservation practice. For advice on a particular object or proposal, contact Arts Heritage ↗.